1/9/2023 0 Comments Cloud mount movi proDepending on the type of gimbal you have different mounting adapters are available.Ġ1. A gimbal mounting adapter plate is not included with this configuration. An upgrade also gives you the additional components for our RailDolly Kit and RigSkate. With this system you already have the components for the RigMount X, RigMount XL and RigMount Suction Mount configurations. The core components of the Cloud Mount are the same core components of many of RigWheels other products. The Clould Mount gives you the ability to find that perfect balance of resistance, not only for the camera and gimbal but also for the terrain on which you will be operating. You want vibration isolation loose enough to absorb all of the bumps and vibration but strong enough not to fail under the weight of the camera and gimbal. (we would love to see a photo of a setup that actually requires that capacity) Because you are able to “let in” or “let out” the cable, you can fine-tune the resistance necessary for your setup. The vibration isolator of this system can use up to 24 sections of cable of up to 7/16″ diameter. 16, 1/4″ sections will support approximately 65 pounds. 8, 1/4″ sections will support a standard Ronin with a mid to full-size camera. Standard cable requirement for a Ronin-M with DSLR is 4, 1/4″ sections of cable. With our patent pending design you can build up the system to accommodate ANY gimbal/camera combination using standard cable “wire rope”. What makes the Cloud Mount markedly unique is the versatility of the parts and the degree of fine-tuning and customization possible. As with all RigWheels products, there are many different ways you can configure components depending on the shot you’re trying to achieve. For some some surfaces suction is necessary and every option includes 8 of our standard suction cups and vacuum suction cups are available for the most demanding applications. The magnets are cased in rubber so they won’t damage the surface you are mounting to. The “standard” option with 16 magnets provides up to 800lb of pulling force. That is a really large number but in real world conditions it is appropriate measure. 8 Magnets in the DSLR package provide up to 400lb of pulling force. The RigMount magnets are the key to the fast and easy setup of the Cloud Mount. With a small reconfiguration you can change to a ‘sidecar” or “underslung” position. The Cloud Mount (when purchased complete with case) can be deployed to its standard configuration and ready for your gimbal in under one minute. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the time necessary to get up and rolling and increases the cost of a working system. This is a all-in-one solution and usually requires no additional grip and rigging hardware to implement. In the same way that Handheld Gimbal Stabilisers have drastically reduced the time required to achieve smooth dynamic camera movement, the Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle. This option can support gimbals as large as Movi XL with full size cameras (Alexa, Amira, F55, Venice, Varicam etc…) in the standard position and everything down to a Ronin M with DSLR.īuilding on the RigMount XL mounting platform, the Cloud Mount adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. An additional set of cable clamps with all three diameters of cable for fine tuning and 8 high power vacuum suction cups. This Pro option includes additional components for increased capacity in both standard and sidecar positions. Compatible with Ronin 2 and Movi Pro.The RigWheels Cloud Mount camera vibration isolator system is the most practical and versatile vibration isolation system for filmmaking available. The Nodo Inertia Wheels feature low-latency, long range, dual-band, dual-link radios with user customizable drag and inertia. The motors are about 20% more powerful and support cameras such as the Blackmagic Pocket 6K, Canon 1D X Mark III, Sony a7S III, and ALEXA Mini LF. It's about 25% lighter and more compact thanks to monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, although still with a 12-hour runtime. The RS 2 gimbal is a redesigned follow-up to the Ronin-S gimbal with a payload of up to 10 lb. This motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. The versatile Ronin 2 gimbal from DJI is suitable for handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |